Steel Air Supply Vent Covers
Shop our Steel Air Supply Vent Covers in sizes from 10" x 4" to 12" x 6".
Before you order
How to measure for a wall vent or grille.
The single most common return reason is "wrong size", and most are measurement errors. Three minutes to get it right.
01
Take the old one off
Back out the screws and lift the faceplate away. Clear any old caulk or paint from the opening edge.
02
Measure the duct opening
The metal hole behind it, not the painted edge. Width first (shorter dimension), then length.
03
Match the size
Pick the matching Bryce size. The faceplate overhangs the opening so a rough cut stays covered.
04
Screw it on
Mark the holes, then drive the screws into the duct flange or drywall anchors. The kit is in the box.
Also in the catalog
All categories →Finish the rest of the room
Vents, grilles and steel panels in white. Floor registers in brown. Plastic panels in UV-stabilized white.
![[2 Pack] 4" x 6" White Heavy-Duty Plastic Access Panel for Drywall: Premium Wall Hole Cover & Plumbing Panel](http://brycehardware.com/cdn/shop/files/APP0406_0609_Front_45_Degrees_x2_55bc0f8c-1212-4575-a879-c9adbaded59f.jpg?v=1729733664&width=600)
