Floor Registers
Shop our Premium Floor Vents in sizes from 2" x 10" to 4" x 12".
Before you order
How to measure for a floor register.
The single most common return reason is "wrong size", and most are measurement errors. Three minutes to get it right.
01
Remove the old register
Lift it straight up by the damper lever. Do not pry. These sit loose in the duct.
02
Measure the duct opening
The metal hole underneath, not the painted edge. Width first (shorter dimension), then length.
03
Match the size
Pick the matching Bryce size. The faceplate overhangs about 0.75" on each side to cover any cut edges.
04
Drop it in
Tool-free install. The edge-folded faceplate sits flush. No screws, no caulk.
Also in the catalog
All categories →Finish the rest of the room
Vents, grilles and steel panels in white. Floor registers in brown. Plastic panels in UV-stabilized white.
![[2 Pack] 4" x 6" White Heavy-Duty Plastic Access Panel for Drywall: Premium Wall Hole Cover & Plumbing Panel](http://brycehardware.com/cdn/shop/files/APP0406_0609_Front_45_Degrees_x2_55bc0f8c-1212-4575-a879-c9adbaded59f.jpg?v=1729733664&width=600)
